ALPHA 8® CLEAR #354 PRODUCT DESCRIPTION
	ALPHA 8® CLEAR #354 Is a clear, waterbased, strong coating that seals and protects concrete, brick, blocks, driveways, patios, garage floors, pool decks, food processing facility floors and other surfaces. It has great chemical resistance, hot-tire pick-up resistance, and water resistance. APPLICATION : ALPHA 8® CLEAR #354 has a milky white appearance in liquid form and dries clear. It should be applied at the rate of approximately 1/2 gallon per 100 sq. ft. Allow to dry thoroughly, normally 45 to 60 minutes, before applying subsequent coats. Apply 2 to 3 coats to achieve desired results. ALPHA 8® CLEAR #354 is watery in consistency and may be brushed, rolled or sprayed. It is ready to use and should never be reduced with water before application. Surfaces to be coated must be clean, dry, and free from grease, oil or other contaminants that would interfere with proper adhesion. ALPHA 8® CLEAR #354 should not be applied at temperatures below 50 deg. F or when relative humidity is 90 % or more. Do not apply sealer if weather conditions will not permit drying before rain, dew or freezing temperatures. Cool temperatures and high humidity retard drying.

TECHNICAL DATA

SOLIDS BY WEIGHT ................................ 25 - 26 %   WEIGHT PER GALLON .............................. 8.54 LBS.   LIQUID APPEARANCE .............................. MILKY WHITE   DRIED APPEARANCE ............................... CLEAR;GLOSSY ..........................AFTER 2 OR MORE COATS DRYING TIME (depending on temperature & humidity) .......................................... 45 - 60 MINUTES

Our data is based on information from independent laboratories and field testing which we believe to be reliable. Since the conditions of use are beyond Ace Coating Company's control, we cannot guarantee or accept any liability resulting from the use or misuse of our product.

	EASY-TO-USE: Alpha 8® Clear 354 may be applied by spray, brush, or roller. No thinning is required. All surfaces must be clean, dry, and free of dirt, grease, oil or other contaminants which would interfere with proper adhesion. It should be applied at the rate of approximately 1/2 gallon per 100 sq. ft. Allow to dry thoroughly, normally 45 to 60 minutes before applying subsequent coats. Apply 2 to 3 coats to achieve desired results. RECOAT TIME: (Depending on temperature and humidity) . . . normally 1 hour. CLEAN UP: Warm water. LIMITATIONS: Do not apply at temperatures below 50 deg. F. Cool temperatures and high humidity retard cure. Do not apply coating if weather conditions will not permit it to dry before rain, dew or freezing temperatures. Do not ship or store unless protection from freezing is available. CAUTION: Alpha 8® Clear 354 is a smooth grade, glossy product, and may be slippery if left smooth. It is required to use aggregate with the product to create a non-slip surface when being used on decks, patios, walkways, and any other areas where foot traffic may occur. WARRANTY: Materials are guaranteed with respect to uniformity and quality within manufacturing specifications. Seller makes no other warranty, expressed or implied regarding the use of its products. Since use of the product is beyond the seller's control, the buyer assumes all risk of use. Seller's sole obligation shall be to replace material if found to be defective. Seller shall not be liable for any damage, injury, loss, direct or consequential resulting from the use of its products. HEALTH AND SAFETY INFORMATION: Avoid prolonged contact with skin. Do not take internally. Close container after each use. FIRST AID: Eye contact; flush eyes with fresh water for at least 15 minutes. Call a physician if symptoms persist. Skin Contact: wash skin with water. KEEP OUT OF REACH OF CHILDREN. KEEP FROM FREEZING

Please use your browser's "BACK" button to return. Ace Coating Co., Inc      8333 Case Street, La Mesa, CA 91942      (800) 672-7100      www.acecoating.com Copyright   |   Contact Us