ALPHASHIELD 469TM WATER - BASED RUST INHIBITIVE PRIMER
	PRODUCT DESCRIPTION AlphaShield 469TM is an environmentally sound primer to be used over ferrous metal surfaces in preparation for the application of Alpha 8® ( elastomeric roof coating systems. Employing the latest technological breakthroughs in water - based acrylic technology, AlphaShield 469TM can even be applied over properly prepared rusted surfaces, with excellent resistance to flash rusting.

TECHNICAL DATA

Color .......................................................... Buff   Solids by Volume ..................................... 37 % (+/- 2 %)   Recommended Thickness ...... 2 - 3 mils, (in one coat), over properly   ................................................ prepared light rust   .......................... 4 - 6 mils, (in two coats), over properly   ................................................ prepared heavy rust   Theoretical Coverage ................... 192 sq. ft. per gal @ 3 mils   Approximate Shipping Weight .............. 44 lbs. per five gal. pail   .......................................... 440 lbs. per 50 gal. drum   Flash Point (Pensky-Martens closed cup) ................. > 200 deg F Temperature Resistance ....................... 235 deg F (continuous)   VOC (EPA method 24) ............................... 1.43 lbs. per gal.   Clean - up .................................................... water   Recoat Time at 75 deg F ..................................... 2 hours . Thinning .................................... water, no more than 5 %

APPLICATION INSTRUCTIONS Surface Preparation : Abrasive blasting to SSPC-SP6 Commercial Blast is normally recommended. However, power tool or hand tool cleaning in accordance with SSPC-SP3 or SSPC-SP2 is acceptable. Remove all dirt, oil, grease, rust scale and contaminants. New galvanized metal must be free of form oils, and may require light sanding or etching. Mixing and Thinning : Power mix until uniform in consistency. Water may be added up to 5 % by volume, although normally not necessary. Method of Application : Roller or spray. When rolling, use a short nap synthetic roller. When spraying with airless equipment, use equipment such as a Graco Bulldog 300 : 1 or larger, with a tip size of .017 - .019. Conditions : AlphaShield 469TM should not be applied at temperatures below 50 degrees F, or if weather conditions will not permit drying before rain, dew, or freezing temperatures. Cool temperatures and high humidity retard cure. Do not apply when surface temperature is less than 5 deg. F above the dew point. When surface temperature is low and air temperature is high, pay particular attention to maximum application thickness of 2 - 3 mils to prevent surface skinning and possible blistering. CAUTION : Individuals with sensitivity to nuisance dust or organic materials should consult a physician before use. Avoid prolonged contact with skin. Do not take internally. Do not induce vomiting if taken internally. Store at temperatures above freezing. Close container after each use. KEEP OUT OF REACH OF CHILDREN. Water based product. Keep above 32 deg. F, 0 deg. C. Use with adequate ventilation and wear gloves or use protective cream on face and hands if hypersensitive. Our data is based on information from laboratory and field testing and analysis which we believe to be reliable. Since the conditions of use are beyond Ace Coating Company's control, we cannot guarantee or accept any liability resulting from the use or misuse of our product.

Please use your browser's "BACK" button to return. Ace Coating Co., Inc      8333 Case Street, La Mesa, CA 91942      (800) 672-7100      www.acecoating.com Copyright   |   Contact Us