PRODUCT NUMBER:


303

PRODUCT NAME:

ALPHA 8® FLEX-GUARD® #303

PRODUCT CLASS:

ACRYLIC COATING



Appearance:


Milky white liquid

Boiling Point:

212 deg. F

Evaporation Rate:

Less than 1

Vapor Density:

Less than 1

Weight per Gallon:

11.6 lbs.

Vapor Pressure:

Greater than 1

Percent Volatile by Volume:

48 percent max

Hazardous Ingredients:

None known at hazardous level



Stability:


Stable

Hazardous Polymerization:

Will not occur

Hazardous Decomposition Products:

N/A

Conditions to Avoid:

Keep from freezing

Incompatibility:

None reasonably foreseeable



Flammability Classification:


Not DOT Regulated
Flash Point - Non combustible
LEL - N/A

Extinguishing media:

N/A

Unusual Fire and Explosions Hazard:

None

Special Firefighting Procedures:

For fires involving this material, do not enter any enclosed or confined space without proper protective gear, including self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency.



Respiratory Protection:


Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded.

Ventilation:

Mechanical local exhaust ventilation at point of containment release.

Protective Gloves:

Impervious

Eye Protection:

Chemical splash goggles (ANSI Z-87.1 or approved equivalent)



Effects of Over Exposure:


Inhalation - Vapor or mist can cause irritation of the nose, throat and lungs.
Eye Exposure - Possibly slightly irritating to eyes with direct contact.
Skin Exposure - Possible skin irritant with repeated or prolonged contact.

Emergency and First Aid Procedures:

Inhalation - Move subject to fresh air.
Eye and Skin Contact - Flush eyes with large amounts of water for at least 15 minutes. See a physician if irritation persists. Wash affected skin areas with soap and water.
Ingestion - If swallowed give two glasses of water to drink. See a physician.



Steps to be Taken In Case Material Is Released or Spilled:


Keep spectators away. Floor may be slippery, use care to avoid falling. Scoop or shovel solid material into a suitable container for recovery or disposal. Keep spills and cleaning runoff out of municipal sewers and open bodies of water.

Waste Disposal Methods:

Disposal should be in accordance with Federal, state, and local regulations.



Precautions to be Taken In Handling and Storage:


Keep from freezing.

Other Precautions:

None


Please use your browser's "BACK" button to return.

Ace Coating Co., Inc      8333 Case Street, La Mesa, CA 91942     
(800) 672-7100      www.acecoating.com
Copyright   |   Contact Us