SECTION I - CHEMICAL PRODUCT

PRODUCT NAME:

INDUSTRIAL CLEANER

PRODUCT DESCRIPTION:

A general purpose aqueous degreaser with detergents, builders, and water conditioning agents.

SECTION II - COMPOSITION/HAZARDOUS INGREDIENTS 

                                    Exposure Limits (ppm)
                                   for Undiluted Material
INGREDIANT            CAS NUMBER    OSHA PEL  ACGIH TLV
Water                 7732-18-5       Non Hazardous
Surfactants-Nonionic  Proprietary     Not Applicable
Surfactants-Anionic   Proprietary     Not Applicable
Sodium Metasillcate   1344-09-8       Not Applicable
EDTA Tetra Sodium Salt  15708-41-5    Not Applicable
 
This document is prepared pursuant to the OSHA Hazard
Communication Standard (29 CFR 1910.1200). In addition,
other ingredients not "Hazardous" per this OSHA Standard
are listed.
 

SECTION III - HEALTH HAZARDS


This is a concentrated product. If used at full strength observe the following conditions:

Effects of Over Exposure:


Eye - Liquid will cause temporary irritation.

Skin - Material may irritate and/or dry skin.

Ingestion - May be harmful if swallowed.

Inhalation - Not harmful.

First Aid:

Eye - rinse the eye with cool water for at least 5 minutes. Be sure to remove contact lenses if present. Get medical attention if irritation persists.

Skin - Minimal effects. Rinse skin with water. Remove contaminated clothing and shoes and rinse with water.

Swallowed - This product is non-toxic. Give water to dilute and contact a physician if stomach upset persists.

Transportation:

No special precautions are required. This product is non-hazardous for storage and transport according to U.S. Department of Transportation Regulations.

No lableing or placarding required by U.S. Department of Transportation Regulations.

Storage:

Storage Temperature - No restrictions. This product can reversibly freeze and thaw.

Storage Containers: No special requirements.

SECTION V - STABILITY AND REACTIVITY


Stability


Stable at ambient temperature and pressure.

Conditions and materials to avoid

Will not react with water, bases or oxidizers. Avoid strong acids.

Hazardous Decomposition Products

Oxides of carbon from severe thermal degradation.

Hazardous Polymerization

Will not occur.

SECTION VI - FIRE AND EXPLOSION INFORMATION


Flash Point


None

Flammable Limits

LFL N/A UFL N/A

Extinguishing Media

No special requirements. Non-flammable and non-explosive.

Fire Fighting Procedures

Always wear self-contained breathing apparatus with full facepiece.

Special Fire and Explosion Hazards

None.

SECTION VII - SPILL OR LEAK PROCEDURES


Spill


Caution. Spill may be very slippery. Recover usable material by convenient method. Residue may be removed by wipe or wet mop.

Waste Disposal

Dispose of in accordance with all local, state and federal regulations. This product is biodegradeable and will not normally harm sewage treatment microorganisms if diluted and disposed of by sewer or drain.

SECTION VIII - ECOLOGICAL INFORMATION


INDUSTRIAL CLEANER


is entirely biodegradable. The surfactants used in this product were found to be 95-100% degraded in 21 days (data supplied by surfactant manufacturer).

SECTION IX - REGULATORY INFORMATION


All ingredients in this product are listed on the TSCA inventory.
No ingredients in this product are known or suspected carcinogens, as established by IARC or NTP.
No ingredients in this product are subject to the reporting requirements of SARA, Title III, Section 313.
No ingredients in this product are listed on Proposition 65 (California)
No ingredients in this product are reportable under CERCLA.

SECTION X - PHYSICAL AND CHEMICAL PROPERTIES


Appearance:


Clear, colorless liquid

Boiling Point:

100 deg. C

Specific Gravity

1.02

Odor

None

pH

11.4

Solubility in Water

Complete

Volatile Organic Compound Content (greater than 0.1 mm Hg at 20 deg. C)

0.0%


The information contained in this MSDS is believed to be correct but may not be all inclusive, and is intended only as a guide to using the product. ACE Coating Co. is not liable for any loss and/or damage to person or property or loss of use of property resulting from the use of this product, including but not limited to, loss or damage from the handling of, exposure to or contact with the product.


Please use your browser's "BACK" button to return.

Ace Coating Co., Inc      8333 Case Street, La Mesa, CA 91942     
(800) 672-7100      www.acecoating.com
Copyright   |   Contact Us