SECTION I - CHEMICAL PRODUCT

	PRODUCT NAME:	GREASE & TAR REMOVER
	PRODUCT DESCRIPTION:	Concentrated aqueous cleaner containing detergents, chelating agents, alkaline builders.

SECTION II - COMPOSITION/HAZARDOUS INGREDIENTS

Exposure Limits (ppm) for Undiluted Material INGREDIANT CAS NUMBER OSHA PEL ACGIH TLV Water 7732-18-5 Non Hazardous Surfactants-Nonionic Proprietary Not Applicable Surfactants-Anionic Proprietary Not Applicable Sodium Metasillcate 1344-09-8 Not Applicable EDTA Tetra Sodium Salt 15708-41-5 Not Applicable   This document is prepared pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200). In addition, other ingredients not "Hazardous" per this OSHA Standard are listed.

SECTION III - HEALTH HAZARDS

	This is a concentrated product. If used at full strength observe the following conditions: Effects of Over Exposure:	Eye - Liquid will cause severe irritation. Skin - Material will irritate and/or dry skin. Ingestion - Harmful if swallowed. Inhalation - Not harmful.
	First Aid:	Eye - rinse the eye with cool water for at least 15 minutes. Be sure to remove contact lenses if present. Get medical attention. Skin - Rinse skin with water. Remove contaminated clothing and shoes and wash before using again. Ingestion - If conscious, give victim 2 glasses of water and contact a physician. Never give anything by mouth to an unconsious person.
	Transportation:	No special precautions are required. This product is non-hazardous for storage and transport according to U.S. Department of Transportation Regulations. No lableing or placarding required by U.S. Department of Transportation Regulations.
	Storage:	Storage Temperature - No restrictions. This product can reversibly freeze and thaw. Storage Containers: No special requirements.

SECTION V - STABILITY AND REACTIVITY

	Stability	Stable at ambient temperature and pressure.
	Conditions and materials to avoid	Will not react with water, bases or oxidizers. Avoid strong acids.
	Hazardous Decomposition Products	Oxides of carbon from severe thermal degradation.
	Hazardous Polymerization	Will not occur.

SECTION VI - FIRE AND EXPLOSION INFORMATION

	Flash Point	None
	Flammable Limits	LFL N/A UFL N/A
	Extinguishing Media	No special requirements. Non-flammable and non-explosive.
	Fire Fighting Procedures	Always wear self-contained breathing apparatus with full facepiece.
	Special Fire and Explosion Hazards	None.

SECTION VII - SPILL OR LEAK PROCEDURES

	Spill	Caution. Spill may be very slippery. Recover usable material by convenient method. Residue may be removed by wipe or wet mop.
	Waste Disposal	Dispose of in accordance with all local, state and federal regulations. This product is biodegradeable and will not normally harm sewage treatment microorganisms if diluted and disposed of by sewer or drain.

SECTION VIII - ECOLOGICAL INFORMATION

INDUSTRIAL CLEANER

is entirely biodegradable. The surfactants used in this product were found to be 95-100% degraded in 21 days (data supplied by surfactant manufacturer).

SECTION IX - REGULATORY INFORMATION

All ingredients in this product are listed on the TSCA inventory. No ingredients in this product are known or suspected carcinogens, as established by IARC or NTP. No ingredients in this product are subject to the reporting requirements of SARA, Title III, Section 313. No ingredients in this product are listed on Proposition 65 (California)

SECTION X - PHYSICAL AND CHEMICAL PROPERTIES

	Appearance:	Clear, colorless liquid
	Boiling Point:	107 deg. C
	Specific Gravity	1.07
	Odor	Slight
	pH	11.4-11.9
	Solubility in Water	Complete
	Volatile Organic Compound Content (greater than 0.1 mm Hg at 20 deg. C)	0.0%

The information contained in this MSDS is believed to be correct but may not be all inclusive, and is intended only as a guide to using the product. ACE Coating Co. is not liable for any loss and/or damage to person or property or loss of use of property resulting from the use of this product, including but not limited to, loss or damage from the handling of, exposure to or contact with the product.

Please use your browser's "BACK" button to return. Ace Coating Co., Inc      8333 Case Street, La Mesa, CA 91942      (800) 672-7100      www.acecoating.com Copyright   |   Contact Us