ACE- Material Safety Data Sheet

PRODUCT NUMBER:

551

PRODUCT NAME:

ALPHA 8^® ASBESTOS - CAP

PRODUCT CLASS:

ACRYLIC ASBESTOS ENCAPSULATOR

None known at a hazardous level

Boiling Point:

212 deg. F

Evaporation Rate:

Slower than ether

Vapor Density:

Lighter than air

Weight per Gallon:

11.8 lbs.

Percent Volatile by Volume:

43

Flammability Classification:

Not DOT Regulated
Flash Point - Non combustible
LEL - N/A

Extinguishing media:

N/A

Unusual Fire and Explosions Hazard:

None

Special Firefighting Procedures:

For fires involving this material, do not enter any enclosed or confined space without proper protective gear, including self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency.

Effects of Over Exposure:

Inhalation - Vapor or mist can cause irritation of the nose, throat and lungs.
Eye Exposure - Possibly slightly irritating to eyes with direct contact.
Skin Exposure - Possible skin irritant with repeated or prolonged contact.

Emergency and First Aid Procedures:

Inhalation - Move subject to fresh air.
Eye and Skin Contact - Flush eyes with large amounts of water for at least 15 minutes. See a physician if irritation persists.
Wash affected skin areas with soap and water.
Ingestion - If swallowed give two glasses of water to drink. See a physician.

Respiratory Protection:

Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded.

Ventilation:

Mechanical local exhaust ventilation at point of containment release.

Protective Gloves:

Impervious

Eye Protection:

Chemical splash goggles (ANSI Z-87.1 or approved equivalent)

Other Precautions:

None

Stability:

Stable

Hazardous Polymerization:

Will not occur

Hazardous Decomposition Products:

Oxides of Carbon, Acrylic Monomers

Conditions to Avoid:

Keep from freezing

Incompatibility:

None reasonably foreseeable

Steps to be Taken In Case Material Is Released or Spilled:

Keep spectators away. Floor may be slippery, use care to avoid falling. Scoop or shovel solid material into a suitable container for recovery or disposal. Keep spills and cleaning runoff out of municipal sewers and open bodies of water.

Waste Disposal Methods:

Disposal should be in accordance with Federal, state, and local regulations.

Precautions to be Taken In Handling and Storage:

Keep from freezing.

Please use your browser's "BACK" button to return.

Ace Coating Co., Inc     8333 Case Street, La Mesa, CA 91942
(800) 672-7100     www.acecoating.com
Copyright   |   Contact Us

	PRODUCT NUMBER:	551
	PRODUCT NAME:	ALPHA 8^® ASBESTOS - CAP
	PRODUCT CLASS:	ACRYLIC ASBESTOS ENCAPSULATOR

	Boiling Point:	212 deg. F
	Evaporation Rate:	Slower than ether
	Vapor Density:	Lighter than air
	Weight per Gallon:	11.8 lbs.
	Percent Volatile by Volume:	43

	Flammability Classification:	Not DOT Regulated Flash Point - Non combustible LEL - N/A
	Extinguishing media:	N/A
	Unusual Fire and Explosions Hazard:	None
	Special Firefighting Procedures:	For fires involving this material, do not enter any enclosed or confined space without proper protective gear, including self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency.

	Effects of Over Exposure:	Inhalation - Vapor or mist can cause irritation of the nose, throat and lungs. Eye Exposure - Possibly slightly irritating to eyes with direct contact. Skin Exposure - Possible skin irritant with repeated or prolonged contact.
	Emergency and First Aid Procedures:	Inhalation - Move subject to fresh air. Eye and Skin Contact - Flush eyes with large amounts of water for at least 15 minutes. See a physician if irritation persists. Wash affected skin areas with soap and water. Ingestion - If swallowed give two glasses of water to drink. See a physician.

	Respiratory Protection:	Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded.
	Ventilation:	Mechanical local exhaust ventilation at point of containment release.
	Protective Gloves:	Impervious
	Eye Protection:	Chemical splash goggles (ANSI Z-87.1 or approved equivalent)
	Other Precautions:	None

	Stability:	Stable
	Hazardous Polymerization:	Will not occur
	Hazardous Decomposition Products:	Oxides of Carbon, Acrylic Monomers
	Conditions to Avoid:	Keep from freezing
	Incompatibility:	None reasonably foreseeable

	Steps to be Taken In Case Material Is Released or Spilled:	Keep spectators away. Floor may be slippery, use care to avoid falling. Scoop or shovel solid material into a suitable container for recovery or disposal. Keep spills and cleaning runoff out of municipal sewers and open bodies of water.
	Waste Disposal Methods:	Disposal should be in accordance with Federal, state, and local regulations.