|
|
Texture:
Insta-Texture® is excellent way to achieve a slip-resistant surface
that is convenient to apply and and cost-effective to use. This unique
product helps solve the traditional problems associated with exterior
surfaces that are subject to foot traffic.
See Actual
Photos of Texture:
Though you can tint Insta-Texture® to most colors, we have taken
two samples of actual surfaces so that you can see the texture conveniently
achieved when using Insta-Texture®. (just click on the options
below)
Application:
All surfaces must be clean, dry and free of dirt, grease, oil or other
contaminants which would interfere with proper adhesion.
When applied with roller, use a naked roller (no hair on sleeve).
Pour a liberal amount of coating to desired surface, approximately 4
inches wide, 2 feet long. Use the naked roller to spread the coating
over the desired area for best texture results.
For spray application, pour material into Hopper Gun and spray
over desired area. Contact your distributor or Ace Coating Technical
Representative for detailed application recommendations.
|
Description:
Insta-Texture® is a high performance, 100% acrylic water-based
texture coating designed for use on exterior decks, patios, walkways,
and similar areas where foot traffic is heavy. It is excellent where outstanding
durability and appearance is desired. Insta-Texture® is designed
to provide outstanding resistance to the effects of weather and foot traffic,
maintaining excellent color retention, adhesion and resistance to chalking.
Easy
To Use:
Insta-Texture® may be applied by spray, brush, or roller. No thinning
is required.
Recoat Time:
Normally 2 to 8 hours. (depending on temperature and humidity)
Clean Up:
Warm water
Limitations:
Do not apply at temperatures below 50 degrees F (10 degrees C) Cool temperatures
and high humidity retard cure. Do not apply coating if weather conditions
will not permit it to dry before rain, dew or freezing temperatures occur.
Do not ship or store unless protection from freezing is available.
Colors:
Insta-Texture® can be tinted to most colors.
Technical:
Coefficient of Friction
(ASTM-C1028)
Dry: .92
Wet: .86
Est. Dry Time
at 70 deg. F (21 deg. C)
Light Traffic (3 to 4 hours)
Heavy Traffic ( 24 hours)
Close container after each use. Available in 1 and 5 gallon containers.
|
